- +44 203 451 7121
- [email protected]
- London, W5 4UB
All-in-one portable RFID terminal to work in multiple scenrios
RFID Terminal. Range of up to 6m. Supports 125KHz & 134Khz. 4G WWAN for faster data transmission. RFID Terminal. Range of up to 6m. Supports 125KHz & 134Khz. 4G WWAN for faster data transmission.
| Processor | Octa-core 2.0GHz high-performance processor |
| Operating System | Android12.0（GMS） |
| Memory (ROM+RAM) | 64GB + 4GB (standard), 128GB+6GB(optional) |
| SIM | Two out of three SIM card slots, support dual SIM and dual standby* Two out of three SIM card slots: two cards can be held at the same time, Nano SIM card + Nano SIM card /Nano SIM card +TF card |
| Expansion Slot | Micro SD card (up to 256 GB) |
| Display Screen | 6.21-inch, resolution: 1520*720 pixels |
| Touch Screen | Industrial capacitive screen, support wet-hand operation/glove mode/multi-touch/gesture operation |
| Camera | 16 megapixels top camera, support auto-focus/PDAF; 5 megapixels front camera |
| Flashlight | 800mA flashlight |
| Keypad | 5 keypads in total: scan key *2, power key *1, volume key*2 |
| Battery | 3.85V lithium battery, with 4500mAh, detachable(standard)3.85V lithium battery, with 4500mAh, detachable, support NFC(optional) |
| Audio | Built-in microphone |
| Charging Method | Type-C and Pin-port charging, support 18W fast charging |
| Reminder | Vibration reminder/LED reminder/high power speaker/Audio reminder |
| Vibrating Motor | Built-in vibrating motor |
| Sensor | G-sensor/Proximity sensor/Light sensor/Geomagnetic sensor/ Gyroscope |
| Intercom Function (Optional) | Support one-button PTT calls |
| Structural Parameter | |
| Dimension (L*W*D) | 168mm*79mm*13.7mm (Thickest 25mm) |
| Weight | 332.5g (including the battery) |
| Communication Transmission | |
| WWAN (Network Frequency) | China & Eurasian version:2G: B2/B3/B5/B83G: WCDMA: B1/B5/B8, CDMA: BC0, TD-SCDMA: B34/B394G: FDD-LTE：B1/B3/B5/B7/B8/B20, TDD-LTE: B34/B38/B39/B40/B41 |
| WWAN (Data Service) | GSM/GPRS/EDGE/CDMA/UMTS/HSPA/HSPA+/EVDO /WCDMA/TD-SCDMA/TDD-LTE/FDD-LTE |
| WLAN Function | Wi-Fi 802.11/a/b/g/n/ac/d/e/h/i/j/k/r/v/w (2.4G + 5G dual-band Wi-Fi), support 5G PA amplifier and fast roaming |
| Bluetooth | Bluetooth 5.0 |
| GPS | GPS/AGPS/BDS/Galileo/GLONASS/QZSS/GNSS |
| Environmental Parameter | |
| Working Temperature | -20℃ – 55℃*Do not charge under low temperature conditions for the safety Concerns |
| Storage Temperature | -40℃ – 70℃ (without battery) |
| Humidity | 0 – 95% (no moisture condensation) |
| Drop Specification | Multiple drops to concrete floor from the height of 1.5m |
| Roller Drop Specification | 1000 times of roller drops from a height of 0.5 meter |
| Ingress Protection | IP67 |
| ESD Protection | ±15KV (air discharge), ±8KV (contact discharge) |
| Scanning Engine | |
| Barcode Type | It can scan one-dimensional / two-dimensional barcodes |
| Scanning Accuracy | ≧3.33mil |
| Scanning Angle | Pitch: ±70°； Skew:±60°； Tilt：360° |
| View Angle | Horizontal: 45°，Vertical:29.5°，Diagonal:50° |
| Motion Error Tolerance | 8m/s |
| UHF RFID & LF RFID | |
| Communication Protocol | UHF RFID：ISO18000-6C/EPC Class1 Gen2LF RFID：Support EMID/FDX-B/HDX protocols |
| Frequency | UHF RFID：920MHz~925MHz/902MHz~928MHz/865MHz~868MHzLF RFID: Meeting the reading of 125KHz/134.2KHz |
| Output Power | 0~25dbm(standard); 5~30dm(optional) |
| Antenna | Circularly polarized antenna |
| Reading Distance | UHF RFID：0~25dbm, up to 3m (standard); 5~30dm, up to 5m (optional)LF RFID：3~5cm |
| NFC (Optional) | |
| Working Frequency | 13.56 MHz |
| Reading Distance | Within 60 mm |
| Communication Protocol | ISO14443A/14443B/15693 |
| Communication Interface | |
| USB Interface | Type-C (with headset function) *1 |
| OTG Interface | Support |
| Development Support | |
| Programming Language | Java |
| Development API | iScan API (Scanning Development Kits), Device API (Device Management/Configuration Development Kits), Android Standard Interface |
| Development Tool | Eclipse/Android Studio |
| Accessories | |
| Standard Accessories | USB cable*1, power adapter*1, device-back strap*1, battery*1 |
| Optional Accessories | Single charging cradle, bottom charger, 2-in-1 charging cradle, 4-slot charging cradle, 4-slot battery charging cradle, hand strap, fanny pack, protective film, protective case |
| Note | |
| ****** | As the product line is updating from time to time, the information in this document is subject to change without notice. |
iData is a global leader in intelligent hardware innovation and a manufacturer of IOT(Internet of Things) devices, it is dedicated to building a smart world where everything is connected.iData has cooperated with thousands of partners around the world, covering more than 100 subdivided industries, the products are widely used in many fields, such as logistics, manufacturing, retail, health and public utilities etc. iData’s equipment can carry and connect the software services of outstanding partners in various industries, promote the digitization, interconnection and intelligentising in data collection field, to ultimately create value for our customers.
Dedicated to data collecting field
Continuous growth rate in the last 5 years
Global partners
iData devices in use
iData employees
Enterprise APP applications
ACCESS I.T. thrives on linking tech manufacturers to diverse European markets. Our dedicated team ensures seamless product distribution and sales strategies, focusing on creating opportunities for global manufacturers in the UK market.
Our technology bridges international gaps, connecting manufacturers to high-potential markets. We leverage cutting-edge solutions to drive business growth and empower successful B2B collaborations.
Protective film for touchscreen. It can protect the screen from cracking or being scratched in case there’s any accidental drops or impact during usage.
Support maximum charging of devices at the same time. Support plug types of China/Europe/UK/US/Australia
Protective case for the main unit. It can prevent the malfunction of main unit in case there’s any accidental drops or impact during usage
Pistol grip for main unit. Execute barcode scanning by pressing the grip trigger. Only those main units with pin port on the back are compatible
Support maximum charging of 4 batteries at the same time. Support plug types of China/Europe/UK/US/Australia
Supports charging one PDA and one battery simultaneously, compatible with protect case
The power adapter can be selected from EU/UK/US standards.
"(Required)" indicates required fields
Reseller